go to Website
Mediaroom Customers Journalists
Watchlist (0)

Packaging suitable for stress and transport to prevent damage

Especially in the current uncertain economic situation, the main focus is on safety and ability to deliver. The damage-free transport of goods is essential for this and requires packaging that is suitable for stress and transport. In the following, we would like to give an overview of damage prevention through packaging.

Packaging appropriate for stress or transport, taking into account the shipping load, route, duration and transport load, ensures that the packaged goods reach the recipient without damage and also functions to protect the salability and function of the packaged goods. Packaging is the responsibility of the sender, insofar as the goods can only be transported in packaged form for the agreed type of transport and means of transport. In case of a proven packing defect, which is the cause of damage, the Freight Forwarder is therefore not liable and is also not obliged to repair defective packing or to repack the goods. The shipper knows the special characteristics of his products and how best to protect them against damage. The packaging must protect the goods against the expected, foreseeable influences such as typical vibrations, centrifugal forces in tight curves, braking effects, the effects of heat and cold or the stress resulting from multiple transshipments. Warning symbols affixed by the shipper do not replace the packaging. This may even be inadequate if it was used. If the goods are shipped in the sales packaging, which must not be damaged, the goods are "unpacked" in the legal sense.

Packaging suitable for transport in general cargo transportation by truck should meet the following requirements: Protection of the goods against the dynamic loads during transportation and multiple handling or the form-fit of the package. Packages must also be packed in such a way that access to the contents is possible only by leaving external traces, in order to ensure protection against theft. Smaller packages in a consignment should be grouped together to form larger units, and packages heavier than 1,000 kg must be marked with appropriate weight markings. In case of special characteristics of the goods, the standardized handling instructions must be attached.

Incorrectly dimensioned packaging, exceeded performance limits, packaging of inferior quality, lack of instructions for proper handling or labeling of the goods, poor load unit securing on the pallet, defective foiling, goods protruding beyond the pallet or completely unpackaged are among the frequently identified defects in packaging.

In addition to the obligation to pack, the consignor also has an obligation to provide information and labeling. Information on all factors known to the consignor and affecting the execution of the order, such as addresses, type and nature of the goods, gross weight, value of the goods or delivery times, must be provided by the principal in good time. Likewise, the packages must be correctly marked so that the carrier can check the goods for completeness and identity and deliver them to the correct recipient.

Only the adaptation of the entire packaging cycle can lead to an economical and damage-free transport. Packaging optimization starts with the development of the sales or product packaging, which influences the size and stability of the transport packaging.

When taking over the consignment, the forwarder must then check the number and type of packages taken over and the external condition of the packaging, as well as carrying out interface checks. Excluded from this and not to be confirmed is whether the packaging used is suitable for transport, the contents of the individual packages, the number of individual cartons on a pallet or the weight of the packages.

If you have any questions, please contact your local contact at the respective DACHSER branch.

DACHSER worldwide
Contact us
Bookmark article
Share article

You might also be interested in

07/26/2021
Celebrating the swap body

The standard freight container for groupage logistics celebrates its 50th birthday this year. Thomas Simon developed the swap body concept in the late sixties, inspired by maritime shipping containers. After some initial reservations, the swap body became a groundbreaking innovation in overland logistics that revolutionized the entire industry.

Read
07/28/2020
Port of Montreal 4-day strike

The Maritime Employers Association has received a strike notice effective yesterday, Monday, July 27 at 7:00 a.m. until Friday, July 31 at 6:59 a.m. There will be a suspension of mooring services usually provided by longshoremen and cargo handling services at Port of Montreal terminals during this four-day period.

The following are not affected by this situation: liquid bulk handling, the Oceanex service (Bickerdike Terminal) and the grain terminal (Viterra). Please contact your DACHSER representative for more specific information on your particular circumstances. 

The Port of Montreal and its partners expect to return to normal starting Friday, July 31 at 7:00 a.m. and say that the necessary efforts will be made to make up for the delays caused by this exceptional situation.

Read
08/26/2020
Local, regional, worldwide: Storage space wanted?

Are you looking for free storage space and a reliable logistics partner? DACHSER Contract Logistics has free capacities.

Read
10/18/2019
Incoterms 2020

A new version of the Incoterms will take effect on January 1, 2020, and will include a number of changes. The terms of delivery issued by the International Chamber of Commerce regulate essential buyer and seller obligations in international trade, such as transfer of goods to the buyer, transport costs, liability for loss of and damage to goods, and insurance costs.

With the adaptation of the Incoterms 2020 to current global trading practices, the new version is very up-to-date and practice oriented. The aim of the revision was to make the Incoterms clauses more user-friendly. For example, their presentation has been revised to make it easier for users to select the appropriate clause. In addition, the order of the clauses has been changed, and revised user instructions have been added to each clause.

In terms of contents, significant changes have been made to the Intercoms 2010, in particular the following:

  • Different coverage levels in CIF and CIP: As in the past, the seller is still obliged in the Incoterms 2020 to take out transport insurance at their own expense in clauses CIF (Cost Insurance Freight) and CIP (Carriage Insurance Paid). In contrast to the Incoterms 2010, however, the two clauses now provide for different minimum coverages. The minimum coverage to be observed when the CIF clause has been agreed remains unchanged. The transport insurance to be taken out by the seller must continue to at least correspond to the coverage in accordance with the (C) clauses of the Institute Cargo Clauses or similar clauses (insurance of named risks). If the CIP clause is agreed, the seller must now provide insurance coverage in accordance with the (A) clauses of the Institute Cargo Clauses (all-risk coverage). Both the CIF clause and the CIP clause allow the parties to the contract to agree on insurance coverage that differs from this.
  • Inclusion of security-related requirements: Security-related requirements for the transport of goods have now been included in Rules A 4 and A 7 of each Incoterms 2020 clause. As with other the Incoterms clauses, it should be noted that the Incoterms clauses only directly apply to the parties to the sales contract and are not the subject of the contract of carriage.
  • The Incoterms 2020 contain regulations for transporting with one’s own means of transport in FCA, Delivery at Place (DAP), Delivery at Place Unloaded (DPU), and Delivered Duty Paid (DDP).
  • For goods sold under the FCA (Free Carrier) clause and intended for sea transport (such as goods in containers), FCA is stipulating a new option in the future. The buyer and seller may agree that the buyer shall instruct its freight carrier to issue an on-board bill of lading to the seller after the goods have been loaded. At the same time, the seller is obliged to hand over this on-board bill of lading to the buyer. This is typically done through participating banks.
  • Renaming of DAT to DPU (Delivered at Place Unloaded). According to the Incoterms 2010 DAT clause, the seller delivered the goods as soon as they were unloaded from the means of transport at a “terminal.” However, according to the Incoterms 2010 application notes, the term “terminal” was not to be understood from a technical point of view but meant any unloading location. This fact was taken into account in the Incoterms 2020 by renaming the previous DAT clause to DPU (Delivered at Place Unloaded) for the sake of clarity. That means that in the future, any (agreed) place can be the place of destination.

The Incoterms apply between the parties of a (national or international) sales contract and address – but are not limited to – special rights and obligations within this contractual relationship. On the basis of a uniform definition guaranteed in this way, subsequent problems of interpretation or discrepancies between the parties to the sales contract are to be avoided. It should be noted that the Incoterms, due to their character as GT&C-like provisions, do not constitute statutory provisions and thus only become legally binding if they have been effectively agreed between the parties to the sales contract by means of a corresponding reference (for the Incoterms 2020, this is also possible before 1/1/2020). Irrespective of this, in individual cases conflicting statutory provisions still take precedence over an Incoterm clause.

The Incoterms were revised by 500 experts from more than 40 countries.The clauses are recognized worldwide and are in use in more than 30 different languages.

Read